Stone Problems & Solutions

• Cracking and Buckling
• Staining
• Polishing

There are many factors that cause the destruction of natural stone and marble.

Some are:

• The wrong stone having been selected for a particular usage
• Soft marbles which make them more susceptible to stains and scratching
• Some types, like Carrera White, have high mineral contents and easily rust if exposed to water on a continuous basis
• Liquids like nail polish, shampoo, even water can stain a marble vanity top, and liquids like orange juice with a high acid content can breaks down the natural fissures and veins that enhance the beauty of marble.

The biggest culprit is that once the stone is installed, it must be properly cleaned and sealed. Not using the right process can cause:

Cracking and Buckling

Cracking and buckling of your stone is caused by using an oil-based or film-creating substance, which can be found in most commercial waxes and polishes

Staining

Waxing will also trap moisture, speeding up the oxidation process and damaging the grout causing browning, yellowing or staining. Moisture in the air can lead to oxidation within the stone causing a deep tough stain.

Polishing

Re-crystallization is a chemical and heat polishing process that hardens the top layer of marble and quickly restores the stone’s shine. However, this process can cause the marble to become brittle and can actually burn and blister the stone floors.

A dirty mop or just plain water is doing more harm than good. And, a cleaner with excessive acidic or alkaline qualities can actually stain the floor. Without any treatment at all, stone floors can become scratched and dull.

The Marble Doctor Solution

Marble Doctor recommends a Maintenance Prescription Program, once your floors are properly restored, to keep your natural stone and marble looking its best.